Turning a room into a floor plan as you measure it
- Layout
- Drawings & CAD
- BOLDR
A floor plan drawn back at the office is a transcription of a transcription: numbers off a tape, onto a pad, into a drawing. BOLDR's CAD canvas takes each T1R Range reading as an edge, so the outline closes up on the iPad while you are still walking the room. What comes out is a dimensioned plan of the space you measured rather than a drawing somebody built later from a list.
Draw it where you measure it
- A plan drawn later is a second transcription
- Each T1R Range reading lands as an edge
- The outline closes while you are in the room
- Dimensions sit on the edges, not in a list
- No office step between tape and drawing
A room with a hardwood floor is measured with the T1R Range, the green line running along the base of a wall. An iPad on the floor shows the BOLDR CAD canvas on the Draft tab, breadcrumb reading CAD Drawing 6 and Floor plan, with the outline part built and a 13 3/4 inch edge being placed as the reading is taken.
proven favorites
Best Selling Tools
SHOP ALL
BOLDR PRO SOFTWARE
Practical Tools For Every Part Of The Job
Capture measurements with REEKON tools, then use them where the work happens.

100,000+ Customers
Get Started Today
Get more done and reduce errors immediately with REEKON digital measuring tools. Try today risk-free for 30 days and see for yourself.
Reduce Costly Errors
Standardize Workflows
Enter Into Any Software
SHOP NOW



