C1 REACH
MEASURE WHAT YOU CAN'T REACH
Measure, capture, and validate dimensions without ladders, second people, or rough estimates with the C1 Reach Digital Measuring Pole.
A Digital GRADE ROD
A Stable, Measurement Extension
The C1 turns taking measurements into a controlled, repeatable process. It creates a fixed reference point from the floor to the measuring head, giving you a stable base for consistent readings every time leveraging REEKON Digital Products
Measuring Ceilings
Grade Checks with Laser Receiver
Ceiling Offsets
Applications
Internal Measurements
Measure floor-to-ceiling heights without climbing, stretching, or guessing off a tape. Set the base on the floor, extend to the ceiling, and lock it in place to capture a true vertical measurement from a fixed reference point.
Grading Measurements
Turn inconsistent elevation checks into a repeatable process. Use the C1 as a vertical reference for laser or range finder readings to quickly determine height differences across a site.
Digital Measurement Capture
Turn vertical measurements into usable data instantly. Pair with REEKON tools to capture the measurement directly and send it into your workflow. Measurements stay organized, consistent, and tied to the job.
180" Max Height Extention
The C1 extends up to 180 inches (15 feet or 4.57 M), allowing you to capture high measurements while keeping both feet on the ground. From ceiling heights to overhead layout and elevation checks, the extended reach helps you measure difficult spaces faster, safer, and with greater consistency.
Use It Your Way
Capture measurements and instantly send them over Bluetooth to phones, tablets, or computers. Use keyboard emulation workflows, the system can integrate into spreadsheets, notes apps, PDFs, estimating software, and more.
KEY FEATURES
Built for Controlled Measuring
Every part of the C1 is designed to remove movement, guesswork, and inconsistency from vertical measurements. From the base to the measuring head, it creates a fixed, repeatable system so what you measure once is what you trust everywhere.
Stabilizing Foot
Keeps the base in place so every measurement starts from a consistent reference.
Locking Switches
Slide and clamp down on your desired length. No slipping while you measure.
Integrated Bubble Level
Ensure vertical alignment so your measurement is accurate, not just close.
C1 Frequently Asked Questions
No. The C1 is a physical reference tool. It works with your tape measure, laser distance meter, or REEKON tools to capture accurate measurements.
The C1 itself creates a stable, fixed reference. Accuracy depends on proper setup and alignment using the bubble levels, and locks.
The C1 is a reach pole designed to make measurements accurate and repeatable. It’s used for floor-to-ceiling heights, grading references, and overhead measurements that are difficult to capture with a tape measure alone.
Yes, attach the T1 Tomahawk to allow you to capture, save, and share measurements instantly for a more efficient workflow.
No. The T1 Tomahawk and any other REEKON measuring tools shown in product images are sold separately unless otherwise specified.
No. Any laser receivers, lasers, or additional measuring devices shown in product images are for demonstration purposes only and are not included with the C1 unless otherwise specified.
100,000+ Professional Customers
Get Started Today
Get more done and reduce errors immediately with REEKON digital measuring tools. Try today risk free for 30 days and see for yourself.
Reduce Costly Errors
Standardize Workflows
Enter Into Any Software