How does the M1 Caliber measure material as it slides?
- Finish Carpentry
- Trim & Molding
- Miter Saw
Every other way of setting a length on a chop saw measures something other than the part: a block behind the piece, a mark on the fence, a tape hooked on the table. The M1 Caliber reads the material itself. Slide the piece under the wheel and the wheel turns with it, so the number on the screen is the distance from the blade to the end you are holding. Pull the stock back and the number falls; push it out and it climbs. Nothing needs resetting.
How the wheel reads the material
- Wheel rides directly on the workpiece
- M1 reads blade to end, live
- Number moves as the stock moves
- Nothing to reset between cuts
- M1 replaces the block and the mark
The video slides board after board under the M1's wheel on a miter saw fence, with the readings running up and down as the material moves, 20 3/4 and then 20 3/16, and cuts following each one. No block, no mark, no tape. The wheel rides on the workpiece, which is why the reading tracks live instead of being a setting you have to trust.
proven favorites
Best Selling Tools
SHOP ALL
BOLDR PRO SOFTWARE
Practical Tools For Every Part Of The Job
Capture measurements with REEKON tools, then use them where the work happens.
100,000+ Customers
Get Started Today
Get more done and reduce errors immediately with REEKON digital measuring tools. Try today risk-free for 30 days and see for yourself.
Reduce Costly Errors
Standardize Workflows
Enter Into Any Software
SHOP NOW